HPE NonStop NS4 X4 SSD Upgrade Options & Compatibility
Looking for a replacement SSD or more storage for an HPE NonStop NS4 X4? On this entry-class system, the right drive depends on the storage layout, the drive limits HPE designed for the NS4 X4, and details such as carrier, firmware and endurance. This guide explains how NS4 X4 storage is organized, which SSD upgrade options exist, and how to choose a compatible drive for an HPE NonStop (Tandem) system.
HPE NonStop Memory & Storage Upgrade
Special Pricing for HPE NonStop Users
How Storage Is Organized in the NS4 X4
In HPE NonStop (Tandem) systems, customer data does not sit on drives inside the NonStop CPUs. Disk and tape access runs through dedicated I/O controllers called Storage CLIMs (Cluster I/O Modules). The NS4 X4 uses an entry-class version of these controllers.
Storage element | NS4 X4 detail | What it means for SSDs |
Entry-class Storage CLIMs | 2 in a standard system, expandable to 4 | All drive access runs through these controllers |
Connectivity | 12G SAS and 16G Fibre Channel | SAS for disk enclosures, Fibre Channel for SAN storage and tape |
Disk enclosures | Up to 25 SAS SFF drives per enclosure | SSDs and HDDs are 2.5" SAS drives |
System limit | Up to 100 drives per NS4 X4 system | The ceiling for any SSD expansion |
System drives | HPE lists SSDs for the NonStop system drives | SSDs are part of the standard NS4 X4 design |
For NS4 X4 planning, the 100-drive limit is as important as the capacity of each SSD.
NS4 X4 SSD Upgrade Options
Replacing a Failed NS4 X4 SSD
This is the most common request. NonStop disk volumes are typically mirrored, so the volume stays available through its mirror while the failed drive is replaced. The safest choice is a drive with the same HPE part number, and the new drive is brought back into the mirror using HPE's service procedure for your RVU.
Keeping Tested Spares
For smaller NonStop teams and third-party maintenance providers, keeping one or two tested spare SSDs on site is a simple safeguard. Match the spares to the installed drives by part number, carrier and firmware, and a failed drive can be replaced without waiting for delivery.
Adding SSDs Within the 100-Drive Limit
If your enclosures have free bays and the system is below 100 drives, you can add SSDs. HPE states that SSDs and HDDs can be combined in the same NonStop SAS enclosure, so SSDs can be introduced step by step.
Switching HDD Volumes to SSD
Replacing hard drives with SSDs improves I/O performance for busy volumes. The NonStop Storage CLIM can divide one SSD into up to eight partitions (an HDD into up to four), each with its own DP2 disk process cache. Moving a volume from HDD to SSD is a planned data migration, not only a hardware swap.
Using Larger SSDs
When the drive count is close to the limit, larger SSDs are the way to add capacity. This only works if HPE supports that capacity for your NS4 X4 configuration and RVU. In a mirrored volume, the pair defines the usable size, so plan both drives together.
Adding Storage CLIMs
A standard NS4 X4 has two Storage CLIMs and can grow to four. More Storage CLIMs add storage I/O capacity. This is a configuration change to plan with your NonStop support team.
Compatibility Checklist for NS4 X4 SSDs
Use this checklist before you order. A drive that fails any point is a risk, even if the capacity is right.
Checkpoint | Question to answer | Risk if ignored |
System and generation | Is this an NS4 X4 with entry-class V4 Storage CLIMs? | Drive options differ between NonStop generations |
HPE part number | Does the new drive match the part number on the old label? | The most common cause of wrong orders |
Interface and form factor | Is it a 2.5" SAS drive? | The Storage CLIM uses SAS for disk enclosures |
Carrier | Does the carrier match your enclosure? | A drive without the correct carrier will not fit |
Firmware | Is the firmware an HPE level supported for your RVU? | Errors or missing drive health data |
Endurance class | Write intensive, mixed use or read intensive? | Faster wear on write-heavy volumes |
Capacity | Does HPE support this capacity on your system? | The drive may not be usable as planned |
Drive count | Will the system stay within 100 drives? | Exceeds the NS4 X4 design limit |
Mirror partner | Does it match the other half of the mirror? | Wasted capacity or unbalanced volumes |
A compatible SSD for the NS4 X4 passes every checkpoint, not only the capacity check.
Firmware, Endurance and Drive Health
Firmware: HPE enterprise drives run HPE firmware. On NonStop systems, the OSM Service Connection shows an SSD wear gauge, so you can see how much life a drive has left. A drive with unknown or non-HPE firmware may not report its health correctly, even if it works.
Endurance: HPE has offered write-intensive SSDs for NonStop X systems, for example a 400 GB SAS SSD rated at 10 drive writes per day. Match the endurance class of the drive you replace, especially on busy transaction volumes.
Carriers: Earlier NonStop X systems used HPE D3700 SAS enclosures with Smart Carrier drives. Check the carrier on your installed drives before ordering.
Encryption: If your volumes use Volume Level Encryption (VLE), include it in your replacement and migration planning.
What to Send Before Ordering an NS4 X4 SSD
System model: HPE NonStop NS4 X4
NonStop OS RVU
Drive location and current number of drives in the system
HPE part number and a photo of the drive label
Capacity, interface (SAS) and form factor (2.5" SFF)
Carrier type and current firmware level, if known
Replacement of a failed drive, or capacity upgrade
Any error messages or service notes for the failed drive
Quantity
Getting NS4 X4 SSDs from server-parts.eu
server-parts.eu can help identify compatible HPE NonStop / Tandem SSDs for replacements and upgrades, based on your existing configuration and part numbers. We check the part number, carrier and capacity against your request before we quote.
For other NS4 X4 components, see our HPE NonStop NS4 X4 upgrade parts overview. For memory, read our guide to NS4 X4 memory upgrade options and compatibility.
FAQ: HPE NonStop NS4 X4 SSDs
Which SSDs are compatible with the HPE NonStop NS4 X4?
2.5" SAS SSDs that HPE supports for the NS4 X4, with the correct carrier and firmware. The safest match is the same HPE part number as the drive you are replacing. Compatibility depends on the exact system configuration and should be checked before ordering.
How many drives does an NS4 X4 support?
HPE designed the NS4 X4 for up to 25 SAS SFF drives per enclosure and up to 100 drives per system.
Can I upgrade SSD capacity on an NS4 X4?
Yes, by adding SSDs to free bays within the 100-drive limit, moving HDD volumes to SSD, or using larger SSDs where HPE supports the capacity for your configuration.
Can I replace an existing SSD with a larger drive?
Possibly, but check it first. In a mirrored volume, a single larger drive may not add usable capacity, and the new capacity must be supported for your system and RVU.
Do HPE NonStop SSDs require specific firmware?
Use drives with HPE firmware at a level supported for your NonStop RVU. OSM shows SSD wear information, and drives with unsupported firmware may not report it correctly.
Can different SSD capacities be mixed?
Different volumes can use different drives, but both halves of a mirrored volume should match. Check your storage layout before mixing capacities.
Can SSDs and HDDs be mixed in the same enclosure?
Yes. HPE states that SSDs and HDDs can be combined in the same NonStop SAS disk enclosure.
Are refurbished HPE NonStop NS4 X4 SSDs available?
Yes. server-parts.eu supplies refurbished and tested HPE NonStop SSDs, depending on stock. Each drive is checked against your part number, carrier and firmware requirements before we quote.
How do I identify the correct replacement SSD?
Read the HPE part number from the drive label, note the carrier type and capacity, and send a photo of the label. server-parts.eu can then check the match before you order.
HPE NonStop Memory & Storage Upgrade
Special Pricing for HPE NonStop Users







Comments